Bios is updating ec firmware updating contact information
To change the fan control policy, updates to the embedded controller's firmware are usually necessary.In some systems, fan control is not provided by the embedded controller, but is instead done by a higher-level component such as an ACPI controller.Browse to the location where you downloaded the file and double-click the new file.2. The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS4MP". Read over the release information presented in the dialog window.3. From the Save In: field, click the down arrow then click to select Desktop and click Save. If the Download Complete window appears, click Close. Computer systems such as laptops often produce large amounts of heat which must be dissipated.
The Embedded Controller is the one responsible with the power management and some other stuff for our notebook.It is a table with many values where each one represents something for the notebook.I only know of a few values that show the curent fan speed, the cpu/gpu temperature and the battery capacity.The embedded controller (EC) is an essential component in modern mobile, ultra-mobile and embedded computer systems.An efficient EC sub-system enables energy-conscious designs to obtain dramatic power savings.By changing the EC they can also change the default fan profiles for the CPU/GPU and I'm still hoping that they'll change the damn fan profile for the CPU so people won't need NBFC to lower their temps.F2 will be working ONLY if you perform the full shutdown or soft reboot - as only this two options prevents the OS from Fast hybrid booting.Download and install any prerequisites identified in the dialog window before proceeding.4. Follow the remaining prompts to perform the update.1. When the File Download window appears, click Save or Save this program to disk and click OK. After completing the file extraction, if the Self-Extractor window is still open, close it.6. Type "C:\DELL\DRIVERS4MP" in the Open textbox and then click OK.8. A Trusted Platform Module contains an embedded controller that performs cryptographic functions and nothing else.Although the embedded controller is very "deep" in the system, it is important to the user because it performs functions such as fan control and thermal management.